SWITCH-PoE16300WGSFP. Switch POE 16 puertos Gigabit +2 Uplinks +1 SFP

Copper Ports

16 10/100 BASE-T RJ45 auto-MDI/MDI-X ports

2 10/100/1000 BASE-T RJ45 auto-MDI/MDI-X ports

Fiber Ports

1-1000BASE-X  ports

PoE Ports

16-802.3af/802.3at PoE Injector Ports

Working Mode

CCTV mode: PoE output up to 250M while bandwidth 10Mbps

VLAN mode: 1-16 ports are isolated from each other and separately work with the 17~19 ports

Switch Architecture

Store-and-Forward

Switch Fabric

9.2Gbps/non-blocking

Throughput

6.84Mpps @64 bytes

Address Table

2K, Auto--learning, Auto-aging

Share Data Buffer

2.5Mb

Flow Control

IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex

PoE Standard

IEEE 802.3.af/at, up to 30W per port

PSE Power on RJ-45

Mode A  1/2(+),3/6(-), end-span

PoE Total

300W

Fan

Fanless

LED Indicator

Power: Green

Solid on- power work normal, off- power disconnected, blink- port short circuit or current over-load

10/100 T RJ45 Interfaces (Port 1 to Port 16): 

LINK/Data (Green)

Solid on- port connected, blink- port connected with data transmission.

PoE (Yellow),

Solid on- PoE works normally,  off- PoE doesn’t work

10/100/1000RJ45 (Port 17-Port 18):

LINK/Data (Green)

Solid on- port connected, blink- port connected with data transmission.

Speed(Yellow)

10/100/1000M- Solid on; off- doesn’t work or speed is 10/100M

1000Mbps SFP Interfaces (Port 19): Green

Solid on- port connected; blink- port connected without data transmission

Network Media(Cable)

10BASE-T: UTP category 3, 5 cable (≤100m)

100BASE-TX: UTP category 5,5e cable (≤100m)

1000BASE-T: UTP category 5e,6 cable(≤100m)

1000 Base-X: fiber optical (depends on SFP module)

Certification

CE, FCC Class B

Surge Protection

±4KV

Dimension

295mm*195mm*45mm

Weight

<1.6Kg

WorkingTemperature

-10 ℃to 45℃

Storage Temperature

 -20℃ to 70 ℃

MTBF

50,000hrs